GARAGE DOOR PARTS AND HARDWARE

 

Master Garage door is a one stop shop for parts and accessories for residential and commercial garage doors. Most of the time we'll have, what others don't. Whether its a roller, cable, spring or garage door opener, we have it all. Call now, and one of our expert members will be glad to assist you choosing the right part for your project. We deliver and install garage door parts in Vancouver and GVA, Calgary and Edmonton.

 

LOOKING FOR GARAGE DOOR AND GARAGE DOOR OPENER PARTS?

  • LIFTMASTER OPENER PARTS AND REMOTES
  • CHAMBERLAIN OPENER PARTS AND REMOTES
  • CRAFTSMAN GARAGE DOOR OPENER PARTS AND REMOTES
  • STANLEY OPENER PARTS
  • AMARR OVERHEAD DOOR PARTS
  • ENTREMATIC GARAGE DOOR PARTS
  • STEELCRAFT GARAGE DOOR PARTS
  • NOORTWEST DOOR PARTS
  • WAYNE DALTON PARTS AND HARDWARE
  • TORQUEMASTER PARTS
  • HOLMES E900 ONE PIECE GARAGE DOOR PARTS

 

END BEARING PLATE

Garage Door End Bearing Plate 3-3/8" Centerline. Comes with heavy duty Freeway bearings. 12 gauge. 3-3/8" from the wall to the center of the bearing. For use with 1" outside diameter shafts.
SPRING ANCHOR BRACKET

Garage Door Spring Anchor Bracket 3-3/8" CL. 3-3/8" from the wall to the center of the bearing. 11 gauge. With standard bearing, lag screws, bolts to secure spring.
BOTTOM FIXTURE

Garage Door Bottom Fixture for 2" Track. For use with residential garage doors. 13 gauge steel. Milford pin attachment to cable. 5-11/16" high X 2-7/8" wide. 1-3/8" deep (flange)

 

 
HINGE #1

Garage Door Hinge 11 Ga #1. The hinge length is 7 1/4." The roller carrier width is 3 1/16."

 
HINGE #2

Garage Door Hinge 11 Ga #2. The hinge length is 7 1/4." The roller carrier width is 3 1/16."
HINGE #3

Garage Door Hinge 11 Ga #3. The hinge length is 7 1/4." The roller carrier width is 3 1/16."

 
HINGE #4

Garage Door Hinge 11 Ga #4. The hinge length is 7 1/4." The roller carrier width is 3 1/16."
TOP FIXTURE

Garage Door Residential Top Fixture. 16 gauge. For use on residential garage doors.
STRUT 2"

Garage Door Strut Kit 2-1/4" 24 Ga for 9' wide door. Kit includes: Two 4'5" 2-1/4" Struts. One 32" Connecting Junction Strut.
STRUT 3”

Garage Door Strut Kit 3" 20 Ga for 9' wide door. Kit includes: Two 3" Struts that are 4'5" long. One 32" Connecting Junction Strut.

 
STEEL ROLLERS 2"

Garage Door Rollers. 2" steel (actual roller width 1-3/4"). 4"or 7" long stem x 7/16" diameter. 7-ball. 10,000 cycles of an 8' high door at 35lbs per roller

 
NYLON ROLLERS 2"

Garage Door Rollers. 2" nylon roller (actual roller width 1-3/4") 4" or 7" long stem x 7/16" diameter. 11-ball. 15,000 cycles of a 12' high door at 75 lbs per roller.

     
CABLES 1/8" FOR 7' AND 8' HIGH TORSION SPRING DOOR

Assembled cable lengths are 8'6" for 7 foot high door and 9' 6" for 8 foot high door. Seven strands of 19 wires form the galvanized cable. With Open Loops and Stop Sleeves.

 
CABLES 3/32" FOR 7' AND 8' HIGH TORSION SPRING DOOR

Assembled cable lengths are 8'6" for 7 foot high door and 9' 6" for 8 foot high door.
Seven strands of seven wires form the galvanized cable. For use with 7’ and 8' high Wayne Dalton and Franz overhead garage doors.
EXTENSION SPRING SAFETY CABLE FOR 7' AND 8' EXTENSION SPRING DOOR

Garage Door Assembled Restraint Cable for 7' and 8' high door. Run one of these cables through your extension spring and secure it to the wall. When your extension springs break, it will stay on the cable. 1/8" cable. For use with extension spring systems. Assembled cable length: 8' 6" and 9' 6".7 strands of 7 wires form the cable.
4" CABLE DRUM, 8' STANDARD LIFT FOR 1" SHAFT

Garage Door Cable Drum. 4" Diameter. For Standard Lift Doors up to 8' High. Can lift up to 265 pounds per drum. Can hold up to 1/8" cable.
4" CABLE DRUM, 12' STANDARD LIFT FOR 1" SHAFT

Garage Door Cable Drum. 4" Diameter. For Standard Lift Doors up to 12' High. Can lift up to 375 pounds per drum. Can hold up to 5/32" cable.

 
GARAGE DOOR TORSION SPRINGS

Various sizes available for commercial and residential garage doors doors. For specific sizes and availability, please call.

 
GARAGE DOOR EXTENSION SPRINGS for CLOPAY

Various sizes available for Clopay doors doors. For specific sizes and availability, please call.
EXTENSION SPRINGS FOR HOLMES E900 SYSTEM

Plug end garage door extension springs for Holmes E900 system. P328, P528, P728, P928

 
2" HORIZONTAL TRACK WITH 12" OR 15" RADIUS ANGLE. PAIR. FOR 7" AND 8" HIGH DOORS.

Garage Door Tracks 2" Horizontal with 12" or 15" radius with .075 gauge steel. For 7' and 8" high doors.
FLAG BRACKETS FOR RESIDENTIAL GARAGE DOORS

Garage Door Flag Brackets - Pair. Maximum distance from jamb to center of the further track bolt is 3 3/4 inches.
GARAGE DOOR PUNCHED SUPPORT ANGLE 1-1/4" 12 GA RESIDENTIAL

Garage Door Punched Support Angle 1-1/4" 12 GA for Residential garage door track support and opener mount.
GARAGE DOOR BOTTOM SEAL

Garage door bottom seal. No retainer. 4", 5" and 6"

 

 
GARAGE DOOR BOTTOM WEATHER SEAL WITH L-SHAPE RETAINER

Garage door bottom weather seal with aluminum retainer. 4", 5" and 6"

 

OTHER GARAGE DOOR REPAIR SERVICES

Broken torsion spring repair and replacement, Garage door cable repair, garage door panel repair and replacement, rollers and hinges, new garage doors, commercial overhead door repair, door service, remote programming, new opener installation services, Liftmaster product repairs, Wayne Dalton doors, Clopay door service, Northwest doors and service, Steelcraft, Chamberlain openers, Genie openers and accessories.

GARAGE DOOR REPAIR SERVICE AREAS

Vancouver garage door repair- Burnaby- North Vancouver- West Vancouver - Richmond - Squamish, Whistler - Langley - Abbotsford - Delta - Port Coquitlam - Coquitlam - Port Moodey - Surrey overhead doors - Garage door repairs near me - Edmonton - Calgary - Toronto